Connect to PSC Wi-Fi Network: WINDOWS
PSC Wi-Fi Overview
Connect to PSC with
Android Apple iOS ChromeOS Linux Windows
IMPORTANT! In order to configure a device for PSC network access it must have Internet access. Devices can be set up while off campus using your home Wi-Fi network or cellular data connection, or you can temporarily use PSCvisitors if you are on campus.
- Launch your preferred web browser and go to https://wifi.pensacolastate.edu
- Your Windows operating system should be automatically detected. If the detection was incorrect you can select the correct system in the drop-down at the bottom of the page.

- Click JoinNow to begin configuring your device.
- A file called WiFi_Pensacola_State_College_Wrapper.exe will be downloaded.
- Run the file from your browser window or navigate to your download location and run the file from that location.

- If you are prompted to "allow this application to make changes to your device" click Yes.
- Click Next to continue device registration.

- You will have to log in using your PSC email address and network/email password.

- After signing in you should see Joined in the install window. Click Done.

- If you are on campus verify that you are connected to the PSC Wi-Fi network. If you are not on campus your device should automatically connect to PSC when you arrive.
Contact the HelpDesk if you need further assistance.