Connect to PSC Wi-Fi Network: APPLE iOS
Modified on: Tue, Nov 29 2022 6:13 AMAndroid Apple iOS ChromeOS Linux Windows
IMPORTANT! In order to configure a device for PSC network access it must have Internet access. Devices can be set up while off campus using your home Wi-Fi network or cellular data connection, or you can temporarily use PSCvisitors if you are on campus.
-
If you have any PSC Wi-Fi settings in your device you'll need to remove them. Otherwise, proceed to Step 2.
a. In your Wi-Fi settings "Forget" the PSC network if that option is available.
b. Open Settings --> General --> Profiles (or VPN & Device Management, depending upon the iOS version).
c. Select and delete any previously installed Wi-Fi profile related to PSC wireless networks.
d. Enter your device passcode, if prompted.
e. Confirm the deletion by tapping Delete.
-
Launch your favorite web browser and navigate to https://wifi.pensacolastate.edu.
-
Your iOS operating system should automatically be detected. If the detection was incorrect you can select the correct OS in the drop-down at the bottom of the page. Tap Sign In.
-
You will have to log in using your PSC email address and network/email password. Complete the sign-in process.
-
After signing in click JoinNow.
- When asked to allow the download of the configuration profile select Allow.
- After the profile downloads tap Close on the notification.
- You must now install profile that you downloaded. Click Go to Settings, then click Profile Downloaded.
- Tap Install.
- If prompted, enter your iOS passcode then tap Install.
- Once the profile has been installed tap Done.
- If you're on campus check to ensure your device is connected to the PSC Wi-Fi network. If you're not on campus your device should connect automatically when you arrive.
Contact the HelpDesk if you need further assistance.